#CT209 Excess steerer tube trimmed away (2009) #CT209 Lightened Vagner crown with chevrons remove… #CT209 Decorative tang being added to crown (2009) #CT209 Modified side profile of Vagner crown after… #CT209 Modified crown with one blade set being tes… #CT209 Blades inserted, but not brazed. 700x29mm t… #CT209 inserting tube inside of blade for internal… #CT209 Tubing for generator wiring routing in blad… #CT209 Blades are single butted Reynolds 531 Imper… #CT209 Tube carrying generator wire exits blade wh… #CT209 Tube carrying wire through blade from near… #CT209 Blade brazed to crown before clean up (2009… #CT209 Finished fork. Left blade has tube for inte… #CT209 Finished fork. Blades are single butted Rey… #CT209 Stainless steel dropouts (2009) #CT209 View of the under side of fork crown #CT209 Finished crown, side view. Note: brass line… #CT209 Raw investment cast bottom bracket shell #CT209 Bottom bracket shell's points were removed… #CT209 Heavily modified bottom bracket shell (2009… #CT209 Heavily modified bottom bracket shell, side… #CT209 Bottom bracket shell ready for points to be… #CT209 Another view of shell before points are car… #CT209 Fork crown and steerer after brazing (2009) #CT209 Steerer tube inserted into Vagner crown and… 3 Vagner forged fork crowns Vagner crowns. The one in the middle has been rewo… Unpainted, partially built up for fitting, and alm… #CT209 in progress with builder, Corey Thompson (L… Chromed 105mm steel stem made by Corey Thompson. Thinned, tapered, and reworked upper head lug plus… Luxor alloy tail light updated by Kina Smith with… Stem cap Braze-on mount for wireless speed sensor driving t… Seat cluster features wrap over seat stays with de… 2014 after 16,ooo km. Full view with final compone… 2014 after 16,ooo km. Full view with final compone… Kimura reflector and modified Luxor tail light (hu… Mafac Helium quick release and rear dropout Right rear dropout, 12-25 Campagnolo Record casset… Rear 1st-style Mafac Competition brake caliper wit… Chromed, light weight, steel rack is constructed o… Front rack support attaches through the front, rat… Owner's name was masked onto the top tube by Spect… Thinned and tapered lower head lug, down tube gear…