Mostly done, front view
Mostly done, back view
The original case is marked
Here's the problem
First piece
Then I did the sides
The result
Outside filler pieces
And the same thing for the bottom
The result so far
The whole process is repeated for the top
Whew!
Replacing the metal lip
Rescued again by luck
Lip and kerfed strips, all dry
I decided on stain and urethane
The hardware got installed
Lining
And it fits!
Wisconsin Graduation
Warming up the crowd
Jamming before the show
The reunion show begins
A dab hand is needed . . .
The tension hoop is added
Time for a new calfskin head
Why it's a Whyte Laydie
Not all surprises are bad
Stripping the neck
Gluing the dowel stick to the neck
The tailpin had broken in the dowel stick
The pot was smaller than the original one on the n…
The raw materials
Staining was problematic
The repair in progress
The problem
Jorma Kaukonen at work
Looks as if summer's almost over
Wet snow in the woods
Next to the church
Hanging on as autumn approaches
Surveying the wreckage
Celebrity Chef Matt Rapposelli slices a giant puff…
The fate of the giant puffball
Kirchen, Burbridge, and Bohren
See also...
Keywords
Authorizations, license
-
Visible by: Everyone -
All rights reserved
-
195 visits
The neck is loosely fitted


This is entirely unnecessary, but I do it to make sure that there's nothing obviously wrong. All was well. The pot was then put aside to dry. I've found that a good way to dry a new head is to do a load of laundry -- socks and underwear -- and dry it in the dryer, then put the pot in a drawer with the still-warm, very dry laundry. Only after it is thoroughly dry can the head be tightened. This takes at least a day, but two or three days is better. Master banjowright Vinnie Mondello recommends lightly spraying the head with water and redrying it many times before tightening it; I took his advice with this instrument and was pleased with the results.
- Keyboard shortcuts:
Jump to top
RSS feed- Latest comments - Subscribe to the comment feeds of this photo
- ipernity © 2007-2025
- Help & Contact
|
Club news
|
About ipernity
|
History |
ipernity Club & Prices |
Guide of good conduct
Donate | Group guidelines | Privacy policy | Terms of use | Statutes | In memoria -
Facebook
Twitter
Sign-in to write a comment.