#CT209 Top view of the reworked seat biner (2009) #CT209 Adding brass fillets to change profile. Not… #CT209 Reworked seat lug from another view #CT209 Reworking seat lug (2009) #CT209 Weak seat binder removed and replaced with… #CT209 Front view of raw stamped Prugnat long poin… #CT209 Another view of stamped Prugnat long point… #CT209 Unreinforced seat binder that is prone to f… #CT209 Raw seat long point Prugnat Type-S stamped… #CT209 Finished bottom brackt shell showing filed… #CT209 Brass fillets smooth the radius between she… #CT209 Brass fillets to smooth the chain stay lug… #CT209 Another view of rough cut long point lugs (… #CT209 Initial carving of long point lugs into BB… #CT209 Another view of shell before points are car… #CT209 Bottom bracket shell ready for points to be… #CT209 Heavily modified bottom bracket shell, side… #CT209 Heavily modified bottom bracket shell (2009… #CT209 Bottom bracket shell's points were removed… #CT209 Raw investment cast bottom bracket shell #CT209 Another view of the center pull brake bosse… #CT209 Finished braze on center pull brake bosses… #CT209 Thompson-made threaded plug in bottom of st… #CT209 Extensively reworked seat lug (2009) #CT209 Finished seat binder. Fully filed. Threaded… #CT209 Another view of finshed seat lug. (2009) #CT209 Yet another view of the finished seat lug (… #CT209 Raw stamped Prugnat lugs marked up for fili… #CT209 Top view of raw stamped Prugnat head lugs (… #CT209 Bottom view of raw stamped Prugnat lugs (20… #CT209 Fillets and top point added to reshaped sid… #CT209 Added point and fillets of lower head lug (… #CT209 Added fillet to smooth the radius of the lo… #CT209 Bottle bosses with star shaped reinforcers… #CT209 Cleaned up bottle bosses #CT209 Braze on front derailleur mount on seat tub… #CT209 Main triangle tubes mitered. Lugs reworked… #CT209 Tool with dimpled chain stays to increase… #CT209 Main triangle going together (2009) #CT209 Braze of shifter bosses #CT209 Upper head lug junction (2009) #CT209 Seat cluster. Excess seat tube will be trim… #CT209. Rear triangle being fitted to grame. Chain… #CT209 Top eye brazed to seat stay end #CT209 Wrap over seat stays with tips of top eyes…