#CT209 Seat cluster. Excess seat tube will be trim… #CT209 Dropout attached to True Temper Platinum ro… #CT209. Rear triangle being fitted to grame. Chain… #CT209 Top eye brazed to seat stay end #CT209 Wrap over seat stays with tips of top eyes… #CT209 Rear view of wrap over seat stay attachment… #CT209 Finished seat cluster. Wrap over seat stay… #CT209 Top view of finished seat cluster (2009) #CT209 Right side dropout brazed into stays. Note:… #CT209 Chain stay bridge. Note: hole for place a t… #CT209 Rear center pull brake bosses are brazed to… #CT209 Thompson rear brake cable housing stop for… #CT209 Chain slap guard mounts are brazed to the t… #CT209 Threaded fender mount in chain stay bridge… #CT209 Another view of the area behind the extensi… #CT209 Thompson-made threaded plug in bottom of st… #CT209 Finished seat stay bridge and rear brake bo… #CT209 Test fitting of supplemental tail light ont… 159 SNV12862 #CT209 Circular brake cable housing guide is braze… #CT209 Reworked dropouts. Note: radius filed on we… #CT209 Inside of the drive side drop out as viewed… #CT209 Finished braze on center pull brake bosses… #CT209 Braze of shifter bosses #CT209 Main triangle going together (2009) #CT209 Raw stainless dropouts (2009) #CT209 Tool with dimpled chain stays to increase… #CT209 Main triangle tubes mitered. Lugs reworked… #CT209 Cleaned up bottle bosses #CT209 Braze on front derailleur mount on seat tub… #CT209 Bottle bosses with star shaped reinforcers… Bailey with the bits of #CT209 on the stone alignm… #CT209 Added fillet to smooth the radius of the lo… #CT209 Added point and fillets of lower head lug (… #CT209 Fillets and top point added to reshaped sid… #CT209 Bottom view of raw stamped Prugnat lugs (20… #CT209 Top view of raw stamped Prugnat head lugs (… #CT209 Raw stamped Prugnat lugs marked up for fili… #CT209 Yet another view of the finished seat lug (… #CT209 Another view of finshed seat lug. (2009) #CT209 Finished seat binder. Fully filed. Threaded… #CT209 Extensively reworked seat lug (2009) #CT209 Reworked seat binder for rear quarter #CT209 Top view of the reworked seat biner (2009) #CT209 Adding brass fillets to change profile. Not…