.:madworm:.'s photos
LED strip - brightness vs. position
| |
|
There's a voltage drop of about 1V across the 5m strip. Too much resistance. Needs multiple power injections to compensate.
Lifetime supply of 100nF caps
| |
|
I scored these caps at a clearance sale. I use them all the time as decoupling caps. Nevertheless, this reel should last me forever.
Clouds
Flux transfer - success
Flux transfer - 1st attempt
Integrated O-ring
| |
|
This one should (in theory - muahahahaha) survive longer. The piston and plunger are one part and the O-ring sits in a groove.
New flux-capacitor
| |
|
A cheap syringe. This one doesn't have the screw-on option for the tips, but the tapered 'thing' is the same. The tips will fit quite securely, IF the mating surfaces are clean.
Damaged Flux-capacitor
Cooking for dummies
| |
|
Buy what you like (no processed junk food please), chop it up, throw it into a pot, add butter, preferred herbs, pepper and salt, let the meat / bacon brown a bit, add water, turn down the heat, cover, let simmer for about 45 minutes.
Couldn't be easier than that.
What does it say?
| |
|
Mysterious sticker on a letter.
It's obviously from "Japan Post", but what does it say? Is it "Anybody who can't read this is an ..."?
Japanese stamp
| |
|
Akafugu LED candle
| |
|
Very easy to build. The micro comes pre-programmed.
My custom PWM-enabled firmware: github.com/madworm/ledcandle
Akafugu LED candle
| |
|
Very easy to build. The micro comes pre-programmed.
My custom PWM-enabled firmware: github.com/madworm/ledcandle
Semi broken WMRP RT3
| |
|
The tip is wasted, so I cracked it open. Will be thrown out once I have a replacement.
Akafugu LED candle
| |
|
Akafugu LED candle
| |
|
Very easy to build. The micro comes pre-programmed.
My custom PWM-enabled firmware: github.com/madworm/ledcandle
Akafugu LED candle
| |
|
Tiny 1k resistor
| |
|
