.:madworm:.'s photos

Tiny SMD capacitor

Tiny SMD capacitor

09 Jul 2009 159
Tiny SMD resistor

Tiny SMD resistor

09 Jul 2009 163
myMultiProg + mySmartUSB MK2

myMultiProg + mySmartUSB MK2

08 Jul 2009 246
The USB programmer can be configured to work as an USB to SPI/TWI/Serial bridge too using the dip switches. It also supports adding an ISP header and 3.3V/5V jumper. It works with avrdude as "AVR911". shop.myavr.de/best%c3%bcckte Boards/mySmartUSB MK2 (Programmer und Bridge).htm?sp=article.sp.php&artID=42
Development board + programmer + LCD addon

Development board + programmer + LCD addon

08 Jul 2009 215
Assembler reference sheet for the ATmega8 mcu as the background. www.myavr.de
ATtiny13 + ATmega32

ATtiny13 + ATmega32

08 Jul 2009 216
Assembler reference sheet for the ATmega8 mcu as the background.
myAVR Board MK2 USB

myAVR Board MK2 USB

08 Jul 2009 204
Assembler reference sheet for the ATmega8 mcu as the background. www.myavr.de
LCD board

LCD board

08 Jul 2009 203
Assembler reference sheet for the ATmega8 mcu as the background. www.myavr.de
myMultiProg

myMultiProg

08 Jul 2009 198
Assembler reference sheet for the ATmega8 mcu as the background. www.myavr.de
myAVR educational KIT

myAVR educational KIT

08 Jul 2009 195
Everything there needed to go. Development board, programmer, battery, breakout board for the most common 8bit AVR processors
myAVR educational KIT

myAVR educational KIT

08 Jul 2009 209
www.myavr.de
myAVR educational KIT

myAVR educational KIT

08 Jul 2009 214
www.myavr.de
EXPLI.de - "grand prize"

EXPLI.de - "grand prize"

08 Jul 2009 228
I was lucky and won the electronics competition on www.expli.de
mySmartUSB MK2 on openSUSE 11

mySmartUSB MK2 on openSUSE 11

08 Jul 2009 188
The CP210x usb/serial adapter gets detected by YaST as a scanner. Don't proceed with it, abort !
mySmartUSB MK2 on openSUSE 11

mySmartUSB MK2 on openSUSE 11

08 Jul 2009 177
plugging it in the first time
mySmartUSB MK2 on openSUSE 11

mySmartUSB MK2 on openSUSE 11

08 Jul 2009 218
Plugging it in the 2nd time. /dev/ttyUSB0 gets created, seems to work. Avrdude can talk to it when choosing AVR911 as the programmer type. If you choose AVR910 as shown in the manual, it doesn't support the ATmega168 chip ?!?
mySmartUSB MK2 on openSUSE 11

mySmartUSB MK2 on openSUSE 11

08 Jul 2009 196
The CP210x usb/serial adapter gets detected by YaST as a scanner. Don't proceed with it, abort !
IKEA Samtid - modding target

IKEA Samtid - modding target

07 Jul 2009 160
yellow piranha

yellow piranha

07 Jul 2009 188
5899 items in total