15W CFL + 7W LED full blast IKEA Samtid - reading light mode IKEA Samtid - wall washer V2.0 alpha - assembly step #1 V2.0 alpha - assembly step #5 V2.0 alpha - assembly step #9 V2.0 alpha - assembly step #8 V2.0 alpha - assembly step #7 V2.0 alpha - assembly step #4 V2.0 alpha - assembly step #6 V2.0 alpha - assembly step #3 V2.0 alpha - assembly step #2 V2.0 alpha - assembly step #0.2 V2.0 alpha - assembly step #0.1 Artsy mistake V2.0 alpha - assembly step #10 V2.0 alpha - assembly step #12 Green / yellow ? Definitely green V2.0 alpha - assembly step #14 V2.0 alpha - assembly step #13 Purple Pink ? Arduino is down... Lord Helmet Looks a bit like... Added another 8x 0805 LEDs Added another 8x 0805 LEDs V2.0.c backside V2.0.c front TC33X2-202 Weller RT3 pencil The switch died, so I put in a LED PT4115 driver - modded ATtiny13 board doing PWM and sensing UP/DOWN contacts Improvised ISP connector Contacts Me pointing at something Me still pointing at something PT4115 full blast PT4115 lowest setting Obligatory arduino board Arduino + 'undimmable' LED board Weller WSM 1 - teardown