Dummy load - V1.00

This version provides basic capability for microcontroller remote control using 0-5V signals. It takes 0-5V as a set-current intput and spits out 0-5V signals for the DUT voltage and current (both clamped to 5V using Zener diodes). I did NOT include an RC low-pass filter for the input. Either use a micro with a DAC or add a simple filter elsewhere.

After completing a device for my own 'happy happy joy joy', I will be having a few boards left over - as usual. This time it will be 4 boards. If it works as expected, the remaining 5 boards will go into another DIY-kit experiment. These will be available via my blog - if you want it or not ;-)

Schematic and all design files.