Chisel stay ends, Campagnolo 1010 horizontal dropo… Frame has brazed on shifter bosses and two sets of… Drivetrain Chisel blade ends and tied-soldered DT Revolution… Full view. Paint, masked graphics, and lining by… Frame features tapered, very thin lugwork and a fl… Fast back stays, super thin lugs, and internal cab… Chromed, steel stem made by Stevenson. Internal ca… Ciamillo Zero Gravity brake calipers are very ligh… Curved brake bridge flows into the seat stays. Underneath detail. Bottom bracket shell features a long cut-out, unde… Seat cluster and saddle. Braze on front derailleur allows rear wheel insert… Nylon mud flap slides into rolled fender edges Special Thompson panel and winged CT transfers. Chromed decaleur made by Corey Thompson Healight and front racks from above Rear triangle Friction shifter controls front derailleur Healight and front racks Rinkoed rear fender Friction lever controls front derailleur Bottom bracket Head and seat tube badges were painted on to the f… White Industries polished H3 hubset and a tied-and… Side pull brake caliper is bolted to fork crown wi… The bike is built with Columbus SL tubes, stays, a… Fork features reinforcer tangs on the inside of th… Top view of Stevenson-made stem showing spearpoint… UnderneathBB Shell UnderCrown RearSideCurvedBrakeBridge RearBrake R UpperHeadLugStem R SeatClusterSignature R LowerHeadLugR Crown R Headlugs R FullView R ForkEnd R Drivetrain R DowntubeLettering L StemHandlebars L RearDropoutHub