ipernity: Fun with LEDS by .:madworm:.

LT1618 on DIP adapter

17 Dec 2009

577

LT1618 boost converter finally mounted on a DIP adapter. Prototyping can begin.

MBI5168 SMD breakout board

05 Oct 2011

315

I have a couple of these chips, both in SMD and DIP. Quite often I shy away from playing with them due to the 'hassle' of setting them up. Maybe this will help a bit. The boards are just 32x32mm

MBI5168 SMD breakout board

05 Oct 2011

239

I have a couple of these chips, both in SMD and DIP. Quite often I shy away from playing with them due to the 'hassle' of setting them up. Maybe this will help a bit. The boards are just 32x32mm

MBI5168 DIP breakout

07 Oct 2011

280

Maybe useful as well. Maybe...

MBI5168 DIP breakout

07 Oct 2011

250

Maybe useful as well. Maybe...

MBI5168 breakout board

25 Oct 2011

236

I did a test assembly. The potentiometer is not the right kind (wrong package and wrong resistance range), but it works ;-) It can easily be used with the arduino ' shiftPWM ' library. Up to 100mA per channel if you keep an eye on the chip temperature. Made with KiCad .

MBI5168 breakout board

25 Oct 2011

210

I did a test assembly. The potentiometer is not the right kind (wrong package and wrong resistance range), but it works ;-) It can easily be used with the arduino ' shiftPWM ' library. Up to 100mA per channel if you keep an eye on the chip temperature.

MBI5168 breakout board

25 Oct 2011

230

I did a test assembly. The potentiometer is not the right kind (wrong package and wrong resistance range), but it works ;-) It can easily be used with the arduino ' shiftPWM ' library. Up to 100mA per channel if you keep an eye on the chip temperature.

MBI5168 breakout board

25 Oct 2011

523

I did a test assembly. The potentiometer is not the right kind (wrong package and wrong resistance range), but it works ;-) It can easily be used with the arduino ' shiftPWM ' library. Up to 100mA per channel if you keep an eye on the chip temperature. Made with KiCad .

Still at rest

12 Dec 2012

280

I won the fight against this MBI5030 PWM LED driver. It turned out that the datasheet I got from the distributor's website is "preliminary". I was trying to use stuff that simply isn't in the final silicon (like parity check for example). Still some functions don't work (like auto-shutoff if the PWM clock is missing). Oh well... The resulting Arduino-ized code may be found here .

Getting there...

12 Dec 2012

280

I won the fight against this MBI5030 PWM LED driver. It turned out that the datasheet I got from the distributor's website is "preliminary". I was trying to use stuff that simply isn't in the final silicon (like parity check for example). Still some functions don't work (like auto-shutoff if the PWM clock is missing). Oh well... The resulting Arduino-ized code may be found here .