.:madworm:.'s photos
Some people are braindead
| |
|
So it took 4 full weeks from the US to Germany this time. Including customs delays.
I got a letter from German postal service. They couldn't find the customs papers (invoice) and therefore forwarded the letter to my local customs office.
Of course the invoice was included in a pouch labeled "CUSTOMS PAPERS ENCLOSED". Somebody simply can't read it seems.
IR remote + receiver
| |
|
I got these from Adafruit. I simply couldn't find something similar locally. They should work well for remote controlling all sorts of LED gadgets. Now I need to have a look at decoding the IR data.
Some C- code .
Battery release mechanism
| |
|
Well designed - it simply works
All mine
| |
|
and a calorie bomb. Most of it will go into the freezer. I can get a serving of lasagna for 1.25€ at my local Aldi. I doubt that my version is cheaper, but at least it is fresh. Probably not healthier at all, with all that cheese and meat in there.
I wish you could smell it ;-)
Pasta heaven
Not bad for a non-gas grill
| |
|
One day I will have a gas oven. At least a gas cooking plate. That is so much nicer to work with and it makes more sense from an energy perspective as well.
Crappy headphone jack
| |
|
I really wish the small local electronics shops would stop to stock this kind of CRAP. And I especially asked for a better quality product. The other stuff they had was even worse.
I think I'll have to get a real metal one via the interweb... and the sad thing is: probably for the same price.
DOH ! - How to find...
| |
|
the one "not so dry" spot in your cellar.
Take a pair of perfectly fine wooden speakers, put them into a carton box and put them into the cellar. Come back 9 years later and see the water damage.
The speakers probably still work just fine, but the bottom part of them is seriously mutilated and willingly soaked up any humidity present. So I can't sell these anymore...
DOH!
I might try building new boxes using CNC cut MDF - if I can get the tweeters out. The woofer is attached with bolts, but the two other speakers seem the be held in by glue :-(
BTW, did I already say DOH! ?
DOH DOH DOH !
I knew inrush current could be high...
| |
|
but not THAT high.
When I plugged this one in, there was a little explosion, I saw the flash, felt the heat at my fingers and the main circuit breaker popped out.
However the power supply still works as before.
Strange.
DSCN1352
| |
|
Spherical analyzer for measuring electron energy. Electrons are kicked out by a typical Ti:Sa 800nm 1kHz fs-laser.
DSCN1351
| |
|
This UHV system went to the 10^-10 mbar range. It had a scroll-pump, turbo-pump, ion-getter-pump and a titanium-sublimation-pump. Pressure was measured with a Bayard-Alpert hot-cathode type gauge.
DSCN1350
| |
|
DSCN2401
DSCN2402
| |
|
File name :DSCN2402.JPG
File size :630.5KB(645592Bytes)
Shoot date :2002/02/26 15:04:03
Picture size :2048 x 1536
Resolution :72 x 72 dpi
Number of bits :8bit/channel
Protection attribute :Off
Hide Attribute :Off
Camera ID :N/A
Model name :E995
Quality mode :NORMAL
Metering mode :Multi-pattern
Exposure mode :Programmed auto
Flash :No
Focal length :8.2 mm
Shutter speed :1/9second
Aperture :F2.6
Exposure compensation :0 EV
Fixed white balance :Preset
Lens :Built-in
Flash sync mode :N/A
Exposure difference :N/A
Flexible program :N/A
Sensitivity :Auto
Sharpening :Auto
Curve mode :N/A
Color mode :COLOR
Tone compensation :AUTO
Latitude(GPS) :N/A
Longitude(GPS) :N/A
Altitude(GPS) :N/A
DSCN1344
| |
|
DSCN1341
| |
|
DSCN1342
| |
|

















