.:madworm:.'s photos

Creating a DSO trigger test jig

21 Apr 2012 133
SPI binary counter

Creating a DSO trigger test jig

21 Apr 2012 138
Missing pulse / runt pulse.

Creating a DSO trigger test jig

21 Apr 2012 156
Some serial data.

Fixed Floppy Drive

Solder joint fatigue

20 Apr 2012 139
I don't remember abusing this connector. It stopped working today.

Dirty little bugger

19 Apr 2012 172
Now I desire some sort of pattern trigger... oh the pain... I had to press single-shot again and again to capture this one.

Dirty little bugger

19 Apr 2012 148
If you're serious about a scope, don't buy one without some sort of persistence. Get one that smoothly fades out if you can.

Confused trigger

19 Apr 2012 222
This one should have triggered on a positive pulse shorter than 73µs.

Confused trigger

19 Apr 2012 211
This one should have triggered on a positive pulse longer than 177µs.

MIBAM

19 Apr 2012 212
Playing with the persistence setting. It is variable, but unfortunately the old traces don't fade out. They just vanish after a timeout.

MIBAM - trying to get it to trigger

MIBAM - bad ISR runtime

19 Apr 2012 224
The ISR takes too long and messes up the timing of the least significant bits.

MIBAM - delayed interrupt

19 Apr 2012 227
Once in a while the interrupt gets delayed. The green pulse-train shows when and how long the ISR runs. This causes fluctuations in brightness.

MIBAM - OK ISR run time

19 Apr 2012 232
Now the ISR is short enough as not to interfere too much with the least significant bits.

5899 items in total