GBC-H212 - fuse
GBC-H212 - HT46R47
GBC-H212 - mobo
GBC-H212 - ntc_probe
GBC-H212 - ntc_wires
GBC-H212 - psu
sac8250_lead-free_3
sac8250_lead-free_1
sac8250_lead-free_2
sac8250_lead-free_4
8x8 RGB Matrix -1st prototype #01
8x8 RGB Matrix -1st prototype #02
8x8 RGB Matrix -1st prototype #04
8x8 RGB Matrix -1st prototype #03
8x8 RGB Matrix -1st prototype #05
8x8 RGB Matrix -1st prototype #06
Protoboard + lots and lots of wire
imgp1567
imgp1569
imgp1570
imgp1572
imgp1573
imgp1576
boarduino back side
boarduino front side
Modding the GBC H212 Laminator for THICK stuff (PC…
Closeup on the plastic parts that need to be remov…
Toner transfer test with laminator - closeup
Toner transfer test with laminator
pulsarprofx toner transfer: test 02
pulsarprofx toner transfer: test 03
pulsarprofx toner transfer: test 01
2nd arduino project - 8x8 rgb matrix
2nd arduino project - 8x8 rgb matrix
2nd arduino project - 8x8 rgb matrix
2nd arduino project - 8x8 rgb matrix dimensions
1st arduino project
1st arduin project - boxed
1st arduino project - M² scanner pimped
1st arduino project - HAL 9000
See also...
Keywords
Authorizations, license
-
Visible by: Everyone -
All rights reserved
-
171 visits
GBC-H212 - 25k_pot
25k pot in series with the ntc. adding 1.9k was enough to bring the drums from about 130°C to 170°C. the toner transfer paper stuck much better to the PCB, but the results were still poor. and the laminator stinks even worse at higher temperatures. should only be used outside of buildings. can't imagine how people tolerate that odor in offices.
NO MORE TONER TRANSFER.
NO MORE TONER TRANSFER.
- Keyboard shortcuts:
Jump to top
RSS feed- Latest comments - Subscribe to the comment feeds of this photo
- ipernity © 2007-2024
- Help & Contact
|
Club news
|
About ipernity
|
History |
ipernity Club & Prices |
Guide of good conduct
Donate | Group guidelines | Privacy policy | Terms of use | Statutes | In memoria -
Facebook
Twitter
Sign-in to write a comment.