Misc 2017

The Hotel Imperial at Coonabarabran, and inland rural town in NSW, Australia. January 2017.

A small representation of the motel props restored DiamondT prime mover. January 2017.

A restored DiamondT prime mover owned by the proprietor of the Amber Court Motel in Coonabarabran, NSW. January 2017.

A restored DiamondT prime mover owned by the proprietor of the Amber Court Motel in Coonabarabran, NSW. January 2017.

A restored DiamondT prime mover owned by the proprietor of the Amber Court Motel in Coonabarabran, NSW. January 2017.

A restored DiamondT prime mover owned by the proprietor of the Amber Court Motel in Coonabarabran, NSW. January 2017.

A restored DiamondT prime mover owned by the proprietor of the Amber Court Motel in Coonabarabran, NSW. January 2017.

A restored DiamondT prime mover owned by the proprietor of the Amber Court Motel in Coonabarabran, NSW. January 2017.

Found while walking around Tallagatta's shopping street. January 2017.

Found while walking around Tallagatta's shopping street. January 2017.

Found while walking around Tallagatta's shopping street. January 2017.

Found while walking around Tallagatta's shopping street. January 2017.

Found in an indoor sports centre carpark. February 2017.

I wanted a 12V test lamp while working on a car so I combined an LED and a resister off a scrap cct board, an old ballpoint pen tube, an old faulty multimeter probe, plus a crocodile clip and some wire from the junk box. I then used some solder, glue and heatshrink sleeving to put it all together. The photo shows the test lamp connected to the 12V output of a power supply. I expect this will also be used in working on electronics on the bench. February 2017. See note.

I wanted a 12V test lamp while working on a car so I combined an LED and a resister off a scrap cct board, an old ballpoint pen tube, an old faulty multimeter probe, plus a crocodile clip and some wire from the junk box. I then used some solder, glue and heatshrink sleeving to put it all together. The photo shows the test lamp connected to the 12V output of a power supply. I expect this will also be used in working on electronics on the bench. February 2017.