Rinkoed front fender
Front hub
Special Thompson badge transfer
Stem cap, stem, and headset
Rim and tire
Before and after: modification of a fork crown
Before and after: modification of a head lug
Head lugs
Construction of seat cluster
Milling old alloy cable hanger
101
102
103
Headlugs and pump peg.
105
106
107
108
Crown accommodates recessed brake bolt
110
111
112
113
Stem, cable hanger, and upper head lug
Detail of seat cluster showing brush work and rear…
Seat, seat post, and seat cluster
Rear drive train
Lower head lug and crown
Fork ends
Thompson down tube lettering
Front drive train
Rear brake housing hanger fabricated by Corey Thom…
Special Thompson "Made in USA" transfer.
Full view, with front low rider racks attached.
Rear center pull brakes
Generator powered tail light and curved brake brid…
Dropouts and stay ends
Rinkoed rear fender
Healight and front racks
Friction shifter controls front derailleur
Rear triangle
Healight and front racks from above
Chromed decaleur made by Corey Thompson
Special Thompson panel and winged CT transfers.
Nylon mud flap slides into rolled fender edges
1/320 • f/11.0 • 60.0 mm • ISO 400 •
NIKON CORPORATION NIKON D700
Authorizations, license
-
Visible by: Everyone -
All rights reserved
-
353 visits
Full view, without front low rider racks attached.
Seat tube measures 634mm (c to top) and is 28.6mm diameter Columbus Zona tubing with wall thicknesses of .8/.6mm.. Top tube measures 610mm (c to c) and is 28.6mm Columbus Life tubing with wall thicknesses of .75/.45/.75mm. Down tube is 31.75mm diameter Columbus Life tubing with wall thicknesses of .5/.7/.5. 650b x 42mm tires.
- Keyboard shortcuts:
Jump to top
RSS feed- Latest comments - Subscribe to the comment feeds of this photo
- ipernity © 2007-2024
- Help & Contact
|
Club news
|
About ipernity
|
History |
ipernity Club & Prices |
Guide of good conduct
Donate | Group guidelines | Privacy policy | Terms of use | Statutes | In memoria -
Facebook
Twitter
