TI Raleigh SBDU Time Trial Special 1976
serial no. SB 576 H31
An exceptionally early (quite possibly the first) Reynolds 753 time trial special frame built in February 1976 by Raleigh SBDU, Ilkeston. The "H31" bb stamping designates this as only the 31st special order frameset built by the SBDU.
Acquired on eBay (UK) in October 2010 for £433 from its second owner. Back on the road 25 January 2011.
This rare and unusual frame differs from later production SBDU 753 tt framesets:
1. conventional Campagnolo drop-outs instead of vertical ones.
2. the front and rear drop-outs are not drilled
3. seat and chainstay ends are conventional not "fish mouth"
4. seatstay caps are conventional not oversized
Built up with some of the lightest period correct components c. 1976, the complete machine weighs 17.6 lbs
description from the eBay auction:
"The frame is a Time Trial Special model purchased from the original first owner. Raleigh SBDU Time Trial Special frames are much rarer than their road racing equivalents. The frame is of particular interest because after many years of researching Raleigh SBDU Ilkeston, recording frame numbers and details and studying data bases held on the internet etc I feel this frame is probably the first Reynolds 753 frame to be sold to a member of the public. It would also therefore be the first Time Trial Special frame set sold to the public.
Raleigh SBDU Ilkeston worked very closely with Reynolds and in particular on the development of Reynolds 753 tubing. This is not surprising as both Raleigh and Reynolds were both owned by Tube Investments (Ti). Reynolds first produced 753 tube sets in 1974 and Dave Lloyd took the RRA straight-out 50 mile record in October of that year on a 753 frame. 753 frames were then used by Roy Schuiten in the 1975 Paris-Nice and then along with other selected Ti Raleigh team members he rode 753 frames for most of the subsequent races in that year. Roy Schuiten also rode a 753 frame in his world pursuit championship win and also for his wins in the Grand Prix des Nations at Lugano in 1975. 753 frames used at this time by the Ti Raleigh Team were badged Reynolds 531.
Reynolds first announced the production of 753 to the general public in November 1975. The launch was timed to coincide with Roy Schuiten’s hour record attempt in Mexico for which two special 753 frames were made by Raleigh SBDU Ilkeston. They were also painted with a new light weight gold paint and lacquer.
However, Raleigh SBDU never geared up to supply frame sets and accept orders from the public until January 1976. By this time Reynolds, supported by Raleigh SBDU, considered that the technique required to braze 753 tubing had been properly developed. In addition Reynolds were not willing to supply frame sets to frame builders until they had been specifically approved by Reynolds as having acquired the necessary skills to safely braze the tubing. This situation resulted in Raleigh SBDU Ilkeston being able to supply 753 frames to the public 3 months or more before any other frame builders.
Raleigh SBD at Ilkeston required a minimum of 3 months from date of order to build a frame. This frame supplied on 24 March 1976. I have the original sales receipt. Raleigh SBDU Ilkeston frame numbering started at around number 500 at the beginning of 1976. However, the numbering sequence did not distinguish between tube set types so for example a Reynolds 531SL frame could be numbered say 610 and a 753 frameset numbered 611.
When the original owner purchased the frame he was already competing as a veteran in his mid 50’s. He achieved significant success on the frame in the Veterans Best British All Rounder with several finishes in the top 5. Copies of pages from Cycling Weekly detailing some of the owner’s success will be provided to the buyer along with the original receipt for the purchase of the frame. A photo of the owner using the frame in a time trail competition in 1980 will also be provided along with copy correspondence with him.
The frame was repainted some time ago but in exactly the same colour and identical Raleigh transfer set as when first purchased with the help of the original first owner."
Build Date: February 1976
Delivered: 24 March 1976 by Harry Hall Cycles, Cathedral Street, Manchester to G. Thompson of Wirral.
Cost of frame: £105
Frame/Fork
Material: Reynolds 753T double butted metric gauge, code 801, 0.3mm wall
Braze ons: gear cable stop on chainstay, single cable guide on driveside bb top shell, down tube water bottle cage bosings.
Drop outs: Campagnolo 1010B short
Bottom bracket: RGF
Finish: refinished per the original, gold lacquer, block Raleigh letters in black on downtube and seat tube bands in the Raleigh racing colours of red/yellow/black. Raleigh headbadge sticker. Raleigh Special Built Unit stickers on chainstays.
Size: seat tube 57.5 cm (c to c), 59.5 cm (c to t) top tube 57 cm (c to c)
Chain stay length: 16.5" (centre of spindle axle to centre of dropout)
Angles: 72.5 head and 72.5 seat
Fork rake: 1.45"
Wheelbase: 98 cm/38.5"
Bottom bracket height: 10.85”
Rear spacing: 125 mm
Lugs: Prugnat 62 with cut-outs and Vagner fork crown
BB stampings: SB576 59.5 H31
Weights
bare frame: 3.6 lbs
bare fork: 1.5 lbs
built up: 17.6 lbs
Components
Rims: Mavic Extra Legere "Golden Monthlery" Record du Monde du Heure 28-hole rims (700c x 20mm, 259g)
Hubs: 28-hole Campagnolo Super Record low-flange hubs, 14/17/14g. double-butted Sapim stainless spokes radial-laced front and 2x rear and Campagnolo Record skewers.
Tyres: Tufo Jet Pro 19mm sew ups.
Bottom bracket: OMAS Big Sliding bb with titanium spindle, English thread
Chainset: Campagnolo Super Record 177.5 cranks with single 55t chainring
Pedals: Campagnolo Super Record Pista with titanium spindles.
Derailleur: Huret Jubilee 1st gen
Derailleur lever: single Huret Jubilee 2nd gen alloy
Freewheel: Maillard 700 dural Course five-speed 13-14-15-16-17t
Chain: Regina Extra SL Superleggera with hollow pins
Brakes: Weinmann 500 with Mafac "Promotion" delrin bodied drilled levers and CLB alloy housing cables
Headset: OMAS Big sliding black anodised
Stem & handlebars: 3ttt 125mm stem with 3ttt Gimondi Superleggera 40cm 'bars, Benotto black celotape up to brake levers only and Benotto plugs.
Saddle: 3ttt Superleggera, alloy undercarriage
Seat pin: 3ttt Competizione 27.0 cm
Accessories: Cobra alloy bottle cage and Atox Campagnolo bottle and Bikit stopwatch holder
TI Raleigh SBDU Time Trial Special 1976
serial no. SB 576 H31
An exceptionally early (quite possibly the first) Reynolds 753 time trial special frame built in February 1976 by Raleigh SBDU, Ilkeston. The "H31" bb stamping designates this as only the 31st special order frameset built by the SBDU.
Acquired on eBay (UK) in October 2010 for £433 from its second owner. Back on the road 25 January 2…
(read more)
