Warren Yee

Warren Yee

Posted on 03/21/2016

Photo taken on March 21, 2016

Authorizations, license

Visible by: Everyone
All rights reserved

45 visits

K2 Stand off adjusted

K2 Stand off adjusted
That is that and I always think it is not very helpful when user groups tell folks to look at the K2 Service manual for this problem. It it is not covered well at all. The E000 board has many bit that should not be touched the wrong way.

I'll do the standard write-up just to be sure I got everything. I should see if anything else needs looking at before I glue up the leatherette.

Michael Russo has particularly liked this photo


to write a comment.