Authorizations, license

Visible by: Everyone
All rights reserved

55 visits

K2 done?

K2 done?
*Transport arm greased,
*Reset lever to mirror greased,
*Stand-off stud & spring greased,
*ASA dial greased and oiled,
Strap lug tightened and glued,
*Viewfinder Speck removal done as fast a could be,
New Mirror cushion installed,
Side baffle pad to mirror installed,
Film door light seals installed,
*Touch-up paint applied to some bad spots from all the fussing about the cap,
Lens shroud tightened and medium/high strength thread lock used,
- Epoxy product could not be used as the screw port are too near other things,
*Lens rubber grip loose originally, General Purpose Cement applied,
(*extra things done N/C... just did them while I was there)
Just put it back under the cover to night and test in the morning and then slap the cap back on most likely box it up.

Michael Russo has particularly liked this photo

 Michael Russo
Michael Russo
Looks beautiful!!!! Excellent work!
3 years ago.
 Warren Yee
Warren Yee
Thanks. I found that Jeep Black is almost a perfect match to the Pentax paint. I didn't go too overboard touching up... just did the top deck here and there.
3 years ago. Edited 3 years ago.

to write a comment.