Search through .:madworm:.'s photos

  Publication date  /  2013  /  November   -   82 photos

« Oct 2013    1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30    Dec 2013 »

  • Another bird accident - It's a Goldcrest
  • Good bye present
  • Another bird accident - It's a Goldcrest
  • Another bird accident - It's a Goldcrest
  • A big chunk of butter
  • Round things
  • Round things
  • Round things
  • Round things
  • EEVBlog Rulerz
  • Pogo-Key parts
  • Pogo-pin tacked down
  • Pogo-Key
  • Pogo-Key
  • Pogo-pin contact alignment
  • Pogo-pins closeup
  • Pogo-Key
  • Pogo-Key in action
  • Final version in black
  • Birdfood "candle"
  • Final version in black
  • IMGP8507.JPG
  • IMGP8509.JPG
  • IMGP8508.JPG
  • IMGP8513.JPG
  • IMGP8512.JPG
  • Decent powder coating
  • 858D+ main board
  • YOUYUE 858D+ hot air soldering station
  • IMGP8525.JPG
  • IMGP8524.JPG
  • IMGP8522.JPG
  • IMGP8519.JPG
  • IMGP8517.JPG
  • IMGP8521.JPG
  • Some cleaning would have been nice
  • IMGP8530.JPG
  • IMGP8528.JPG
  • OPTO + TRIAC + SNUBBER
  • Isolation slot
  • IMGP8535.JPG
  • IMGP8531.JPG
  • IMGP8536.JPG
  • IMGP8540.JPG
  • IMGP8539.JPG
  • IMGP8541.JPG
  • IMGP8547.JPG
  • IMGP8542.JPG
  • 7805
  • OP-70 precision opamp
  • Egg warmer
  • IMGP8536.JPG
  • IMGP8538.JPG
  • Should I be concerned?
  • IMGP8552.JPG
  • IMGP8549.JPG
  • IMGP8550.JPG
  • Misaligned bolt hole
  • IMGP8558.JPG
  • IMGP8553.JPG
  • IMGP8557.JPG
  • Doesn't stick and melts when device is on
  • Not so safe safety-earth connetion
  • Not so safe safety-earth connetion
  • IMGP8559.JPG
  • I had to redo the lousy ground wire
  • Thermo couple
  • Hrrrmmp!
  • OPTO isolation slot
  • Good policy - wasn't implemented
  • YOUYOE 858D+ hot air soldering station
  • Intelligence inside
  • A little mishap
  • Painful camera setup
  • 50 chips
  • YOUYUE 858D+ PCB
  • YOUYUE 858D+ PCB
  • That didn't last very long
  • Some shrinking tube for mechanical support
  • An Evil Cable
  • Fixed safety-earth cable
  • Not enough wire